Graphy Crown & Bridge TC-80DP shade A1-A3

Graphy Resin TC-80DP C&B was developed for crown and bridges. Due to its high flexural strength of 220 MPA and abrasion resistance, it enables to produce durable long-term prosthesis. It can be ideal for use in industries where mechanical properties are required. The TC-80DP is available in color VITA Shade A1, A2, and A3.

NOTE. Leave a note on the order with the material shade.

599.95 €
  • biocompatible - CE Certified
  • nontoxic
  • high flexural strength
  • good abrasion resistance
  • good mechanical properties
  • ideal for crowns and bridges - the printed parts are more flexible and easy to work with than the standard crown and bridges resins
  • for DLP and LCD-type 3D Printers

Technical Specification

  • Volume: 1kg
  • Color: Shade A1/A2/A3
  • Viscosity: 800 ± 200 cps
  • Surface Hardness: Shore ≥ 80 D
  • Flexural Strength: ≥ 100 MPa
  • Flexural Modulus: ≥ 2500 MPa

NOTE. A perfect workflow is needed to achieve a good final result (mechanical properties, color). Correct pre- and post-processing with compatible software and hardware is essential. Please check the product that is recommended by Graphy for the correct post-processing process - 

Graphy Cure M.

For more information regarding the Graphy Cure M unit contact our support /

Please be aware that this product is not flexible to easily bend after printing as other flexible materials. It is actually a strong material that has high flexural strength and was designed to make it more flexible for easier working with than other standard denture resins. The surface hardness of the product is up to 80D Shore.