Phrozen Castable Dental Green

Specifically designed for casting, the resin burns cleanly to provide reliable casting for all types of 3D printed models, especially 3D printed dental parts.

  • Volume: 500g per bottle
  • Density: 1.12 g/cm3
  • Viscosity: 192 cP
  • Surface Hardness: 75 Shore D
  • UTS: 8 MPa
  • Elongation at Break: 3 %
  • Tensile modulus: 57 MPa
  • Notched Izod Impact: 1.91 J/m

147.95 €


  • Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
  • Keep resin away from kids and away from direct sunlight exposure.
  • Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.